Finished Product

AR-4068-05SD

Human

Shoulder

Product

The Small Diameter SutureLasso™ feature a stiff shaft and a sharp, atraumatic tip with an outer diameter of only 1.8 mm. The SutureLasso SD is available in a variety of tip configurations and is preloaded with a Nitinol wire shuttle loop. A thumb pad is used for easy, one-handed wire advancement. Skip a shuttling step during margin convergence suturing or when using a PushLock anchor by loading a FiberStick directly through the SutureLasso SD in place of the Nitinol wire loop. The FiberStick is a #2 FiberWire with 12 inches stiffened to allow easy advancement through most cannulated instruments.

Small Diameter SutureLasso™

Child (D)

Elbow

Procedure

The precontoured, titanium Dog Bone button allows the use of knotless TightRope® technology or multiple FiberTape® sutures for AC joint reduction. The buttons are attached to the sutures independently—only suture material will be passed through the clavicle and coracoid tunnels—allowing the repair to be completed through smaller tunnels.
The low-profile AC implant and Dog Bone button combine to form a tensionable device optimized for the reduction and stabilization of acute and chronic acromioclavicular joint separations. This dual construct features two independent TightRope sutures preassembled into a clavicle insert and a Dog Bone button, which attaches to the suture loops separately after passing them antegrade through the 3 mm bone tunnels.

AC Dog Bone™ Button Technique

The AC TightRope family of products provides for easy reconstruction of acute AC joint separations in a minimally invasive manner, either open or arthroscopic. The four-strand continuous loop of #5 FiberWire interlaced between two titanium buttons provides strong mechanical fixation while the coracoclavicular and acromioclavicular ligament disruptions heal. Precise bone tunnels are made through the clavicle and coracoid using the specialized instrumentation in the Acromioclavicular Joint Master Set, allowing for simplified passing of the distal button through the transosseous tunnels. Fixation is achieved by cinching down the proximal button over the clavicle and tying a knot over the button.

AC TightRope®

Trauma Upper Extremities

Trauma Lower Extremities

The Clavicle Plate and Screw System is a comprehensive set of plates, screws, and instruments designed to treat midshaft and distal clavicle fractures. The stainless steel plates are low profile and precontoured with locking and nonlocking screw options in each plate. Secondary fixation to the coracoid is achieved through the plate using AC TightRope® implant technology, particularly the AC Dog Bone™ button.
The Knotless Distal Clavicle Plate Button TightRope implant is designed to be used in conjunction with any Arthrex distal clavicle plate and gives the surgeon knotless coracoid ﬁxation to help stabilize distal clavicle fractures.

Clavicle Fracture System

Clavicle Plates and Screws

A choice of a midshaft or lateral plate is determined by the site of the fracture. The fracture is held in reduction while the plate is positioned on the clavicle and temporarily fixated with the use of a BB-Tak pin. The plate is then secured using locking or nonlocking screws. Divergent locking screws can also be used laterally. The lateral plate can also accommodate AC joint reconstruction with the Dog Bone™ button.
The Knotless Distal Clavicle Plate Button TightRope® implant is designed to be used in conjunction with any Arthrex distal clavicle plate and gives the surgeon knotless coracoid ﬁxation to help stabilize distal clavicle fractures.

Clavicle Plates Technique

The precontoured, titanium Dog Bone button allows the use of knotless TightRope® technology or multiple FiberTape® sutures for acromioclavicular AC joint reduction. The button is attached to the sutures independently; only suture material will be passed through the clavicle and coracoid tunnels, allowing the repair to be completed through smaller tunnels.
The low-profile AC implant and Dog Bone button combine to form a tensionable device optimized for the reduction and stabilization of acute and chronic ac joint separations. This dual construct features two independent TightRope sutures preassembled into a clavicle insert and a Dog Bone button, which attaches to the suture loops separately after passing them antegrade through the 3 mm bone tunnels.

Dog Bone™ Button

The Knotless AC TightRope repair system is designed for the reduction and stabilization of acute and chronic acromioclavicular joint separations. For arthroscopic procedures, the dual construct features a #6 TightRope suture preassembled into a clavicle insert and a Dog Bone™ button, which attaches to the suture loops separately after they are passed antegrade through the 3 mm bone tunnels. For open procedures, the construct also features a #6 TightRope suture preassembled into a clavicle insert and a large pec button preloaded onto an inserter, which allows surgeons to perform an open or mini-open “push-through” technique without having to use a scope or access beneath the coracoid.

Knotless AC TightRope® Repair System

Knotless AC TightRope® Technique

The low-profile AC implant and Dog Bone™ button combine to form a tensionable device optimized for the reduction and stabilization of acute and chronic acromioclavicular joint separations. This preassembled construct features two independent TightRope® sutures that attach to a Dog Bone button separately after passing the construct antegrade through a 3 mm bone tunnel.

SutureLasso SD Wire Loop, 5/Box

AR-4068-05SD

Related Pages

Shoulder

Small Diameter SutureLasso™

Product

Elbow

Small Diameter SutureLasso™

Product

Shoulder

AC Dog Bone™ Button Technique

Procedure

Shoulder

AC TightRope^®

Product

Trauma Upper Extremities

Clavicle Fracture System

Procedure

Trauma Upper Extremities

Clavicle Plates and Screws

Product

Shoulder

Clavicle Plates Technique

Procedure

Shoulder

Dog Bone™ Button

Product

Shoulder

Knotless AC TightRope® Repair System

Product

Shoulder

Knotless AC TightRope® Technique

Procedure

Shoulder

Low-Profile Tensionable AC Repair Technique

Procedure