Finished Product

AR-13226T

Human

Foot and Ankle

Product

The plantar Lapidus plate was designed to provide fixation for a Lapidus procedure. The plate is placed plantar on the 1st tarsometatarsal (TMT) joint and is fixed with two 3.5 mm locking screws at both the distal and proximal ends to optimize construct strength. The precontoured left and right plates allow secure plantar placement and spare the tibialis anterior tendon. The plantar Lapidus plate provides compression over the entire arthrodesis area using a solid 4.0 mm compression screw through the plate. The plantar orientation avoids gapping of the arthrodesis site during early weightbearing.1
 
 
Reference
1. Klos K, Simons P, Hajduk AS, et al. Plantar versus dorsomedial locked plating for Lapidus arthrodesis: a biomechanical comparison.&nbsp;Foot Ankle Int. 2011;32(11):1081-1085. doi:10.3113/FAI.2011.1081

Plantar Lapidus Plate

Child (D)

Trauma Upper Extremities

Trauma Lower Extremities

Procedure

KreuLock locking compression screws combine the same proven technology found in our Headless Compression FT screws with a locking screw head to provide compression along the screw for treatment of fractures or fusions. Additionally, they are designed to bring the plate to bone.
<ul>
 <li>Variable-Stepped Thread Pitch – the screw tip’s wider thread pitch enters the bone faster than trailing threads, gradually compressing the fragments as the screw is advanced</li>
 <li>Locking Head – mates with existing plates</li>
 <li>Individual screw and instrument modules for each screw family</li>
 <li>Available in titanium and stainless steel</li>
</ul>

KreuLock™ Locking Compression Screws

The KreuLock locking compression screws combine the same proven technology found in our Headless Compression FT screws with a locking screw head to provide compression along the screw for treatment of fractures or fusions.

Designed to provide excellent fixation for fusions and osteotomies, these plates offer the foot and ankle surgeon a comprehensive option for procedures in the midfoot. These additions to the Low Profile Plating System come with and without wedge blocks, and in a variety of lengths to fixate lateral column lengthenings, calcaneocuboid arthrodesis, talonavicular arthrodesis and other less common procedures.&nbsp;
Features &amp; Benefits: 

<ul>
 <li>Left or Right Slants - Fits a variety of indications.</li>
 <li>Wedge Option - Wedges save OR time and eliminate the need to harvest a tricortical wedge from the iliac crest.</li>
 <li>Locking Option - The outermost holes allow the surgeon to choose a fixed-angle locking or variable-angle nonlocking option, depending on the needs of the patient.</li>
 <li>Compression Option - The inner slots generate compression when drilled eccentrically in arthrodesis applications.</li>
 <li>Minimized Profile - Low profile plates and screw heads reduce soft tissue irritation and the need for removal.</li>
 <li>Anatomic Contour - Optimizes construct strength, simplifies surgical technique and reduces soft tissue irritation.</li>
 <li>Screw Options - 3.5 mm cortical, 3.5 mm cortical locking and 4 mm cancellous.</li>
</ul>

H-Plates

The KreuLock locking compression screws combine the same proven technology found in our Headless Compression FT screws with a locking screw head to provide compression along the screw for treatment of fractures or fusions. Additionally, they are designed to bring the plate to bone.
<ul>
 <li>Variable-Stepped Thread Pitch – the screw tip’s wider thread pitch enters the bone faster than trailing threads, gradually compressing the fragments as the screw is advanced</li>
 <li>Locking Head – mates with existing plates</li>
 <li>Individual screw and instrument modules for each screw family</li>
 <li>Available in both titanium and stainless steel</li>
</ul>

The Lapidus procedure is an arthrodesis of the 1st metatarsocuneiform joint. It is performed most commonly as a method to reduce the intermetatarsal angle (IMA) in the setting of hypermobility or arthritis of the 1st metatarsocuneiform joint.

Lapidus Hallux Valgus Correction

More than a plate, this is a complete system for joint preparation and fixation for the treatment of severe hallux rigidus and other MTP pathologies. Whether used in primary or revision cases, this system enables surgeons to reduce, compress, and lock the 1st metatarsal phalangeal joint in the ideal position for arthrodesis. Features &amp; Benefits:
<ul>
 <li>Anatomic Plate Design - 1.5 mm titanium plate is anatomically designed with 8 degrees of dorsiflexion and 5 degrees of valgus</li>
 <li>Concave, Convex Reamers - Facilitate quick and accurate joint preparation</li>
 <li>3 mm Variable-Angle Locking Screws - With a 30-degree cone of variability</li>
</ul>

Low Profile MTP Plates andScrews

Comprehensive Fixation System, Lid

Tampa de sistema modular completo para pé

Caddy Lid, Comprehensive Fixation System

CFS Deckel für CFS Platten- und Instrumenteneinsätze

Comprehensive Foot Set Standard Caddy Lid

Tapa de caja estándar para juego completo de pie

Tampa da caixa padrão do conjunto completo para pé

Arthrex has a wide array of midfoot plating options housed in the CFS set. The surgeon can choose from specific TMT plates, H-plates, Lapidus plates, dorsal midfoot fusion plates, medial column plates, or mesh plates. The instrumentation for these implants is straightforward and easy to use, assisting the surgeon with distraction, provisional fixation, and other elements of the procedure.

Midfoot Plating Module

Hand and Wrist

The Mini Fragment System (or “Mini Frag”) is designed to aid in the reduction and fixation of small and long bone trauma injuries. The tray modularity offers screw and plate options in 2.0 mm, 2.4 mm, and 2.7 mm sizes. With a wide array of plates to fit a multitude of trauma needs, the Mini Fragment System is a keystone addition to the Arthrex Trauma portfolio.
 
Features and Benefits
<ul>
 <li>Reduction instruments and 6 plate-bending options to meet surgeon and patient needs</li>
 <li>Reinforced plating options across all 3 plate sizes provide added stability when a stronger construct is desired</li>
 <li>A wide variety of plates and screws (2.0 mm screws in lengths up to 40 mm and 2.4 mm and 2.7 mm screws up to 80 mm)</li>
 <li>The split tray design provides intraoperative efficiency by simultaneously making general instruments and the size-specific caddies immediately available, reducing the overall footprint of the entire system</li>
 <li>Each caddy features a compact instrumentation drawer with size-specific short instrumentation</li>
</ul>
 
Indications
The Mini Fragment System is indicated for fracture fixation, reconstruction, replantation, stabilization, reduction, fusions, osteotomies, malunions, and nonunions of small bones and small bone fragments including normal and osteopenic bones in adult and adolescent (12-21 year) patients. The system is also indicated for non-load bearing stabilization and reduction of bone fragments in long bones.

Mini Fragment System 2.0 mm/2.4 mm/2.7 mm

To address various types of fractures, the Patella SuturePlate™ II system offers three types of plates in different sizes. All plates are made of titanium and have a low-profile thickness of 1.6 mm with screws sitting flush on the plate. Suture holes in the plate can be optionally used for soft-tissue reattachment or ligament bracing.

Patella SuturePlate™ II

Guidewire with Trocar Tip, 1.35 mm

Führungsdraht mit Trokarspitze, Ø1.35 mm

Alambre guía con punta trocar, Ø 1.35 mm

FIO GUIA LISO COM PONTA TROCARTE Ø1.35 MM

To address various types of patella fractures, the Patella SuturePlate™ II system offers three types of plates in different sizes. All plates are made of titanium and have a low-profile thickness of 1.6 mm with screws sitting flush on the plate. Suture holes in the plate can be optionally used for soft-tissue reattachment or ligament bracing.

Patella SuturePlate™ Plating System

The Mini Fragment System (or “Mini Frag”) is designed to aid in the reduction and fixation of small and long bone trauma injuries. The tray modularity offers screw and plate options in 2.0 mm, 2.4 mm, and 2.7 mm sizes. With a wide array of plates to fit a multitude of trauma needs, the Mini Fragment System is a keystone addition to the Arthrex Trauma portfolio.
 
Features and Benefits
<ul>
 <li>Reduction instruments and 6 plate-bending options to meet surgeon and patient needs</li>
 <li>Reinforced plating options across all 3 plate sizes provide added stability when a stronger construct is desired</li>
 <li>A wide variety of plates and screws (2.0 mm screws in lengths up to 40 mm and 2.4 mm and 2.7 mm screws up to 80 mm)</li>
 <li>The split tray design provides intraoperative efficiency by simultaneously making general instruments and the size-specific caddies immediately available, reducing the overall footprint of the entire system</li>
 <li>Each caddy features a compact instrumentation drawer with size-specific short instrumentation</li>
</ul>
 
Indications
The Mini Fragment System is indicated for fracture fixation, reconstruction, replantation, stabilization, reduction, fusions, osteotomies, malunions, and nonunions of small bones and small bone fragments including normal and osteopenic bones in adult and adolescent (12-21 years) patients. The system is also indicated for non-load-bearing stabilization and reduction of bone fragments in long bones.

BB-Tak Threaded, qty. 2

AR-13226T

Related Pages

Foot and Ankle

Plantar Lapidus Plate

Product

Trauma Upper Extremities

KreuLock™ Locking Compression Screws

Procedure

Foot and Ankle

H-Plates

Product

Foot and Ankle

KreuLock™ Locking Compression Screws

Product

Foot and Ankle

Lapidus Hallux Valgus Correction

Procedure

Foot and Ankle

Low Profile MTP Plates and Screws

Product

Foot and Ankle

Midfoot Plating Module

Product

Foot and Ankle

Mini Fragment System 2.0 mm/2.4 mm/2.7 mm

Product

Trauma Lower Extremities

Patella SuturePlate™ II

Product

Trauma Upper Extremities

Patella SuturePlate™ Plating System

Procedure

Trauma Lower Extremities

Mini Fragment System

Procedure